Orange Pi PC 2

Orange Pi Introduction

What is Orange Pi PC2?

　It’s an open-source single-board computer. It can run Android 5.1, Ubuntu, Debian, Raspberry Pi Image. It uses the All-winner H5 Soc, and has 1GB DDR3 SDRAM.

What can I do with Orange Pi PC2?

You can use it to build...

• A computer
• A wireless server
• Games
• Music and sounds
• HD video
• A speaker
• Android
• Scratch
• ......
• Pretty much anything else, because Orange Pi PC2 is open source

Whom is it for?

Orange Pi PC2 is for anyone who wants to create with technology– not just consuming. It's a simple, fun, useful tool and you can use it to take control of the world around you.

Hardware specification of Orange Pi PC2

Hardware specification
CPU	H5 High Performance Quad-core 64-bit Cortex-A53
GPU	High Performance Hexa-core Mali450 OpenGL ES 2.0/1.1/1.0, OpenVG 1.1, EGL 40 GFlops, Pixel fill rate greater than 2.7GPixel/s
Memory (SDRAM)	1GB DDR3 (shared with GPU)
On-board Storage	TF card (Max. 32GB) /Emmc slot/NOR flash(2MB)
On-board Network	10/100/1000M Ethernet RJ45
Video Input	A CSI input connector Camera： Supports 8-bit YUV422 CMOS sensor interface Supports CCIR656 protocol for NTSC and PAL Supports SM pixel camera sensor Supports video capture solution up to 1080p@30fps
Audio Input	MIC
Video Outputs	Supports HDMI output with HDCP Supports HDMI CEC Supports HDMI 30 function Integrated CVBS Supports simultaneous output of HDMI and CVBS
Audio Output	3.5 mm Jack and HDMI
Power Source	DC input, USB OTG input don't supply power
USB 2.0 Ports	Three USB 2.0 HOST, one USB 2.0 OTG
Button	Power Button(SW4)
Low-level peripherals	40 Pins Header,compatible with Raspberry Pi B+
GPIO(1x3) pin	UART, ground.
LED	Power led & Status led
Key	Power, IR input
Supported OS	Android Lubuntu, Debian, Raspberry Pi Image
Interface definition
Product size	85mm × 56mm
Weight	63g
Orange Pi™ is a trademark of the Shenzhen Xunlong Software CO., Limited