Orange Pi R1 Plus is an open-source single-board computer with Dual Gigabit Ethernet ports. It is highly compact with a dimension of 56X57mm. It can run Android 9,Ubuntu,Debian, OpenWRT.
Product introduction
-
Rockchip RK3328
-
1GB DDR4 SDRAM
-
USB 2.0
-
Main frequency speeds up to 1.5GHz
-
Cortex-A53
-
TF card
-
Type-C
-
13pin headers
-
Dual Gigabit Ethernet ports
-
Multiple operating systems
Orange Pi R1 Plus uses the Rockchip RK3328 SoC, With Quad-core ARM Cortex-A53 64-bit processor, main frequency speeds up to 1.5GHz, and 1GB DDR4 SDRAM. It integrates cooling fan connector, USB 2.0 port, TF card slot, 13pin headers etc. It is powered through Type-C. It is suitable for industrial control needs.

Orange Pi R1 Plus is for anyone who wants to start creating with technology- not just consuming it. lt's a simple, fun, useful tool that you can use to start taking control of the world around you.
-
Dual Gigabit Ethernet ports, faster
-
Rockchip RK3328 SoC,
more powerful
1GB DDR4
1GB DDR4, sufficient for running various applications, smooth & elegant.


Model |
Orange Pi R1 |
Orange Pi R1 Plus |
Hardware features | ||
SOC |
![]() ![]() |
![]() ![]() |
CPU architecture |
![]() ![]() |
![]() ![]() |
CPU frequency |
![]() ![]() |
![]() ![]() |
Onboard Storage |
· MicroSD card |
· MicroSD card |
Core number |
4 |
4 |
Memory bus |
![]() ![]() |
![]() ![]() |
Memory |
![]() ![]() |
![]() ![]() |
WiFi |
WiFi |
- |
Network |
![]() ![]() |
![]() ![]() |
USB |
USB2.0 |
USB2.0 |
PCB size |
45x60mm |
56x57mm |
Power interface |
![]() ![]() |
![]() ![]() |
PMU |
![]() ![]() |
![]() ![]() |
Fan interface |
![]() ![]() |
![]() ![]() |
Software features | ||
OS |
![]() ![]() |
![]() ![]() |
OrangePi R1 VS OrangePi R1 Plus - Dimension |
Model |
|
![]() ![]() |
![]() ![]() |
Hardware features | |
SOC |
|
![]() ![]() |
![]() ![]() |
CPU architecture |
|
![]() ![]() |
![]() ![]() |
CPU frequency |
|
![]() ![]() |
![]() ![]() |
Onboard Storage |
|
MicroSD card 16MB SPI Flash |
MicroSD card 16MB SPI Flash |
Core number |
|
4 |
4 |
Memory bus |
|
![]() ![]() |
![]() ![]() |
Memory |
|
![]() ![]() |
![]() ![]() |
WiFi+BT5.0 |
|
WiFFi |
- |
network |
|
10M/100M Ethernet |
10M/100M/1000M Ethernet |
USB |
|
USB2.0 |
USB2.0 |
PCB size |
|
45x60mm |
56x57mm |
Power interface |
|
![]() ![]() |
![]() ![]() |
PMU |
|
![]() ![]() |
![]() ![]() |
PCIE |
|
![]() ![]() |
![]() ![]() |
Software features | |
OS |
|
![]() ![]() |
![]() ![]() |
OrangePi R1 VS OrangePi R1 Plus - Dimension |

Hardware specification
CPU | • Rockchip RK3328 • Quad-core ARM Cortex-A53 64-bit processor, main frequency speeds up to 1.5GHz |
GPU |
• Mali-450MP2 • Supports OpenGL ES 1.0/2.0 |
Power management chip | RK805 |
Memory(SDRAM) | 1GB DDR4( shared with GPU) |
Onboard Storage | • Micro-SD Card slot • 16MB SPI Flash |
Onboard Network | • 10M/100M/1000M Ethernet (RTL8211E) • 10M/100M/1000M USB Ethernet (RTL8153B) |
Video Output | TV CVBS output(Via 13pin interface board) |
Audio output | 3.5mm audio port(Via 13pin interface board) |
Power Source | USB Type C interface 5V2A input |
USB | 1x USB 2.0 HOST |
Low-level peripherals | 13pin header with IR pin、Tv-out、AUDIO(no MIC) 2xUSB2.0(not support)and 1 GPIO port |
Debug serial port | UART-TX、UART-RX and GND |
Button | 1x Reset Button |
Fan interface | 1x cooling fan interface (5V) |
LED | Power led & Status led |
IR receiver | Support IR remote control (via 13pin interface board) |
Supported OS | Android 9、Ubuntu、Debian、OpenWRT |
Appearance specification introduction
Dimension | 56mm×57mm |
Weight | 30.5g |
Top view

Bottom view

Orange Pi R1 Plus v1.2 pinout diagram

-
Completely open source maker artifact
-
Orange Pi R1 Plus runs Android
-
Orange Pi R1 Plus runs Ubuntu
-
Orange Pi R1 Plus runs Debian
-
Product display
-
Front
-
Back
-
45° angle
-
45° angle
What can l do with Orange Pi R1 Plus?
You can use it to build-…
Pretty much anything else, because Orange Pi R1 Plus is open source